Hybrid nema stepper motor / geared motors with length 85mm 1.8° step angle

• Model No.: Hybrid nema stepper motor / geared motors with length 85mm 1.8° step angle

Payment & Shipping Terms: Features: Dynamically balanced rotor to offer a smooth operation. Sealed NMB or SKF ball bearings to extend the servicing life. Aluminium alloyed die cast endcaps and the housings with paint finish to endure the extreme working conditions. The hi-precision planetary gearbox to provide...

15BYHJ geared pm stepper motor/ step angle 18° with POM gearbox

• Model No.: 15BYHJ geared pm stepper motor/ step angle 18 with POM gearbox

Product Code: 15mm PM Stepper Motor with POM gearbox 15BYHJ geared pm stepper motor/ step angle 18° with POM gearbox Features: 15mm series of PM stepper motors use permanent magnet rotors and are commanded by electrical pulses. The motors are constructed with the housing at the diameter of 15mm. Before the involvement...

25BYHJ-P geared pm stepper motor/ 25mm pm stepper motor with planetary gearbox

• Model No.: 25BYHJ-P geared pm stepper motor

Product Code: 25mm PM Stepper Motor with Planetary Gearbox 25BYHJ-P geared pm stepper motor/ 25mm pm stepper motor with planetary gearbox Features: In contrast to 15mm series PM stepper motors, 25mm series motors have been increased in motor size (with a housing diameter at 25mm) to produce higher holding torques for...

25BYHJ-S geared pm stepper motor/ installed spur gearbox for rotary lasers

• Model No.: 25BYHJ-S geared pm stepper motor/ installed spur gearbox for rotary lasers

Product Code: 25mm PM Stepper Motor with Spur Gearbox 25BYHJ-S geared pm stepper motor/ installed spur gearbox for rotary lasers Features: With an introduction of spur gearboxes into our basic products lines, 25mm series of PM stepper motors are now richer in motor versions except from the basic parameters like the...

Micro 5v 12v PM stepper motors with less noise and vibrations

• Model No.: Micro 5v 12v PM stepper motors with less noise and vibrations

1、Product Code： housing size is 15mm / step angle of 18° with 2-phase / holding torque currently ranges from 25g.cm to 40 g.cm / external flexible printed circuit / can assembled with a brass synchronous pulley / can be modified to your OEM designs 2、Product Details: 3、 Payment & Shipping Terms: 4、Detailed Product...

2 phase small PM stepper motors with permanent magents for Fax machine

• Model No.: 2 phase small PM stepper motors with permanent magents for Fax machine

Payment & Shipping Terms: Features: 1. 15mm series of PM stepper motors use permanent magnet rotors and are commanded by electrical pulses. 2. The motors are constructed with the housing at the diameter of 15mm. 3. The step angle was initially to be 18° and the motor itself rotated by having the holding torque as...

2 phase small PM stepper motors with permanent magents for Fax machine

• Model No.: 2 phase small PM stepper motors with permanent magents for Fax machine

Payment & Shipping Terms: Features: 1. 15mm series of PM stepper motors use permanent magnet rotors and are commanded by electrical pulses. 2. The motors are constructed with the housing at the diameter of 15mm. 3. The step angle was initially to be 18° and the motor itself rotated by having the holding torque as...

2 phase windings small stepper motors / 5v stepper motor for card reader

• Model No.: 2 phase windings small stepper motors / 5v stepper motor for card reader

Payment & Shipping Terms: Features: Often referred as a “tin can” or “canstack” motor. Being with a typical step angle of 18°, our PM stepper motor is a solution to the applications where a low cost and low-resolution are sufficient. The PM stepper motors have been optimized in structure by moving the PCB (printed...

High precision punched housing PM stepping motor 25mm 4 phase stepper motor

• Model No.: High precision punched housing PM stepping motor 25mm , 4 phase stepper motor

Payment & Shipping Terms: Features: Set up at 7.5° or 15° in step angle and the frame size is at 25mm. 2-phase or 4-phase windings to produce the holding torque varying from 80g.cm to 200g.cm. The PM stepper motor requires no “teeth” as are typically found in the variable reluctance (VR) stepper motor. This makes...

25mm PM stepper motors with permanent magnets / plastic or metal gears

• Model No.: 25mm PM stepper motors with permanent magnets / plastic or metal gears

Payment & Shipping Terms: Features: 25mm PM stepper motor operates on the reaction between a permanent-magnet rotor and an electromagnetic field and normally we use ferrite sintered magnets as one of the key components. The PM stepper motors are optionally built with a planet gearbox, whose main material is POM....

24 V PM stepper motors 28mm frame size / nema stepping motor

• Model No.: 24 V PM stepper motors 28mm frame size / nema stepping motor

Payment & Shipping Terms: Features: 2-phase windings with 15° in step angle. Being facilitated with a captive or non-captive linear shaft, the motor journey ranges from 12mm to 98mm. Our PM stepper motor internally converts rotary linear motion via a rotating nut and a leadscrew. This construction will eliminate...

BYGL 39mm Hybrid Stepper Motor

• Model No.: BYGL 39mm Hybrid Stepper Motor

General Description： Step Angle Error………………………………………±5% Peak Temperature Rise…………………………………………80℃ Max AmbientTemperatureRange…………………………………-20℃~+50℃ Insulation Resistance……………………………………100MΩMin.500VC DC Dielectric Strength………………………………………………500V AC 1S Technical Specifications: * The aboved are just representative...

42BYGHL Hybrid Stepper Motor

• Model No.: 42BYGHL Hybrid Stepper Motor

Features： 1. Simple structure, light weight and small size. 2. The use of computer control improves the positioning accuracy of the entire system. 3. Magnetic levitation support of mover keeps a certain gap between the mover and the stator to eliminate friction, so the system features quick reaction, high sensitivity...

BYGHL 57mm Hybrid Stepper Motor

• Model No.: BYGHL 57mm Hybrid Stepper Motor

General Description： Step Angle Error………………………………………±5% Peak Temperature Rise………………………………………80℃ Max AmbientTemperatureRange…………………………………-20℃~+50℃ Insulation Resistance…………………………………100MΩMin.500VC DC Dielectric Strength………………………………………500V AC for 1 minute Features: 1. The federate of 57BYGHL linear hybrid stepper motor...

25mm PM Stepper Motor with Non-captive Shaft

• Model No.: 25BYZ-B linear pm stepper motor/ step angle 15° with non-cap

Product Code: 25mm PM Stepper Motor with Non-captive Shaft 25BYZ-B linear pm stepper motor/ step angle 15° with non-cap Features: The stator section of our 25mm series PM stepper motors consists of coils, stator yoke, in/out terminal and stators molded together in one piece by plastic resin. PM stepper motors are...

25mm PM Stepper Motor with Captive Shaft

• Model No.: 25BYZ-C linear pm stepper motor/ 25mm motor 2 phase with captive shaft

Product Code: 25mm PM Stepper Motor with Captive Shaft 25BYZ-C linear pm stepper motor/ 25mm motor 2 phase with captive shaft Features: We are very happy to have seen that based upon the basic motor structure of our 25mm series PM stepper motors, an integrated leadscrew and nut in a compact package is introduced to...

28mm PM Stepper Motor with Non-captive Shaft

• Model No.: 28BYZ-01 linear pm stepper motor/ diameter 28mm range of non-captive shaft motor

Produce Code: 28mm PM Stepper Motor with Non-captive Shaft 28BYZ-01 linear pm stepper motor/ diameter 28mm range of non-captive shaft motor Features: Our PM stepper motors come in a version of 28mm diameter and have advantages of simple & low-cost construction, open loop operation and long operational life with...

28mm PM Stepper Motor with Captive Shaft

• Model No.: 28BYZ-A linear pm stepper motor/ 5v or 24v linear motor for valve actuators

Product Code: 28mm PM Stepper Motor with Captive Shaft 28BYZ-A linear pm stepper motor/ 5v or 24v linear motor for valve actuators Features: In the family of 28mm PM stepper motors, the motor shown in the picture is one of the product members, which has demonstrated before our customers the new style to be owed with a...

28mm PM Stepper Motor with Captive Shaft

• Model No.: 28BYZ-A linear pm stepper motor/ 5v or 24v linear motor for valve actuators

Product Code: 28mm PM Stepper Motor with Captive Shaft 28BYZ-A linear pm stepper motor/ 5v or 24v linear motor for valve actuators Features: In the family of 28mm PM stepper motors, the motor shown in the picture is one of the product members, which has demonstrated before our customers the new style to be owed with a...

35mm PM Stepper Motor with Captive Shaft

• Model No.: 35BYZ-A linear pm stepper motor/ step 7.5° resistance 11Ω, 2-phase windings

Produce Code: 35mm PM Stepper Motor with Captive Shaft 35BYZ-A linear pm stepper motor/ step 7.5° resistance 11Ω, 2-phase windings Features: Being revised from our basic products lines of PM stepper motors with a frame size of 35mm, the captive linear PM stepper motors combine screwlead technology, nut technology and...

35mm PM Stepper Motor with Non-captive Shaft

• Model No.: 35BYZ-B linear pm stepper motor/ 35mm simple design motor for medical equipment

Product Code: 35mm PM Stepper Motor with Non-captive Shaft 35BYZ-B linear pm stepper motor/ 35mm simple design motor for medical equipment Features: Being measured at 35mm in diameter, our PM stepper motors exhibit the traditional advantage of low cost construction because of their extremely high-volume and simple...

28BYGH Hybrid Stepper Motor

• Model No.: 28BYGH stand hybrid stepper motor/ small motor with diameter 28mm, step angle 1.8°

Product commerce clause 28BYGH series hybrid stepping motors are design with high precision, low noise, speed, long service life. Widely used in banking office equipment, telecommunications equipment, printers, photocopiers, fax machines, scanners, textile machinery, medical, automatic control, building automation...

BYG 35mm Hybrid Stepper Motor

• Model No.: BYG 35mm Hybrid Stepper Motor

35BYG hybrid stepper motor/ high torque stepper motor for medical equipment Features: The frame size is determined at 35mm. The step angle is 1.8 degrees with a step angle accuracy of +/-5%. The motor body length is flexible from 20mm to 34mm. The holding torque ranges from 380g.cm to 1250g.cm to better fit different...

Micro stepper motors square 39mm sub-contracted and uniform endcaps

• Model No.: Micro stepper motors square 39mm sub-contracted and uniform endcaps

Payment & Shipping Terms: Features: The motor frame size is at 39mm. Being constructed at a step angle of either 1.8 degrees or 0.9 degrees. The holding torque ranges from 550g.cm to 2800g.cm, which will be mostly evaluated by the design engineers. Endures the ambient temperature from -20 to +50 degrees...