Changzhou Sherry International Trading Co., Ltd.

Products

Home > Products > Hybrid Stepper Motor

Hybrid Stepper Motor

View:

    • 57BYGHM hybrid stepper motor/ NEMA 23  high precision and high torque step motor

    57BYGHM hybrid stepper motor/ NEMA 23 high precision and high torque step motor

    • Model No.: 57BYGHM hybrid stepper motor/ NEMA 23, high precision and high torque step motor

    General Introduction: The series of 57BYGHM hybrid stepper motor is designed with step angle 0.9 degrees, in order to reach a higher precision. The motor frame size is NEMA23. When the speed is proportional to the frequency of the input pulses, it can achieve a wide range of rotational speeds. The holding torque is...

    • 86BYGH hybrid stepper motor/ frame size nema 34 with step angle 1.8 and high torque

    86BYGH hybrid stepper motor/ frame size nema 34 with step angle 1.8 and high torque

    • Model No.: 86BYGH hybrid stepper motor/ frame size nema 34 with step angle 1.8 and high torque

    Features: 1. As one of the most important components in motion control industry, the 86mm BYGH series of hybrid stepper motor is a brushless, synchronous electric motor that converts digital pulses into mechanical shaft rotation. 2. The motor frame size is NEMA 34. More options for motor body length or holding torque...

    • 28BYGH Hybrid Stepper Motor

    28BYGH Hybrid Stepper Motor

    • Model No.: 28BYGH stand hybrid stepper motor/ small motor with diameter 28mm, step angle 1.8°

    Product commerce clause 28BYGH series hybrid stepping motors are design with high precision, low noise, speed, long service life. Widely used in banking office equipment, telecommunications equipment, printers, photocopiers, fax machines, scanners, textile machinery, medical, automatic control, building automation...

    • BYG 35mm Hybrid Stepper Motor

    BYG 35mm Hybrid Stepper Motor

    • Model No.: BYG 35mm Hybrid Stepper Motor

    35BYG hybrid stepper motor/ high torque stepper motor for medical equipment Features: The frame size is determined at 35mm. The step angle is 1.8 degrees with a step angle accuracy of +/-5%. The motor body length is flexible from 20mm to 34mm. The holding torque ranges from 380g.cm to 1250g.cm to better fit different...

    • Micro stepper motors square 39mm sub-contracted and uniform endcaps

    Micro stepper motors square 39mm sub-contracted and uniform endcaps

    • Model No.: Micro stepper motors square 39mm sub-contracted and uniform endcaps

    Payment & Shipping Terms: Features: The motor frame size is at 39mm. Being constructed at a step angle of either 1.8 degrees or 0.9 degrees. The holding torque ranges from 550g.cm to 2800g.cm, which will be mostly evaluated by the design engineers. Endures the ambient temperature from -20 to +50 degrees...

    • 39BYGHM

    39BYGHM

    • Model No.: 39BYGHM

    General Description Step Angle Error………………………………………±5% Peak Temperature Rise…………………………………………80℃ Max AmbientTemperatureRange……………………………………-20℃~+50℃ Insulation Resistance…………………………………100MΩMin.500VC DC Dielectric Strength…………………………………………500V AC for 1 minute Specifications Outline Dimensions: (Unit=mm) Wiring...

    • Square flange nema 17 hybrid stepper motor for printers   12v stepper motor

    Square flange nema 17 hybrid stepper motor for printers 12v stepper motor

    • Model No.: Square flange nema 17 hybrid stepper motor for printers , 12v stepper motor

    Payment & Shipping Terms: General Introduction: True to its name, the 42BYGH hybrid stepper motor has a frame size of 42mm. It is internationally called as NEMA 17. The product runs at a step angle of 1.8 degrees with an accuracy of +/-5%. This 2-phase stepping motor is available in various body lengths including...

    • Square flange nema 17 hybrid stepper motor for printers 12v stepper motor

    Square flange nema 17 hybrid stepper motor for printers 12v stepper motor

    • Model No.: Square flange nema 17 hybrid stepper motor for printers , 12v stepper motor

    Payment & Shipping Terms: General Introduction: True to its name, the 42BYGH hybrid stepper motor has a frame size of 42mm. It is internationally called as NEMA 17. The product runs at a step angle of 1.8 degrees with an accuracy of +/-5%. This 2-phase stepping motor is available in various body lengths including...

    • Hybrid stepping motors NEMA 17 mirror inished endcaps strengthened shaft

    Hybrid stepping motors NEMA 17 mirror inished endcaps strengthened shaft

    • Model No.: Hybrid stepping motors NEMA 17 mirror inished endcaps strengthened shaft

    General Introduction: The 42BYGHM series hybrid stepper motor rotates only 0.9°at a time. This makes it suitable for use in applications where precise positioning is required. Both the rotor and stators are made of iron sheets that are stacked and riveted together by high-precision, double-rotation progressive...

    • ATM wire cutting machine hybrid stepper motors with stator lamination stacks

    ATM wire cutting machine hybrid stepper motors with stator lamination stacks

    • Model No.: ATM wire cutting machine hybrid stepper motors with stator lamination stacks

    Payment & Shipping Terms: Features: In internal control for our inventory, the frame size is 42mm. In compliance with NEMA sizes, it is at Size 17. Basic line of products to assure you large-scale purchasing orders and fast-delivery. Comes up with competitive price and reliable motor performance among the overseas...

    • 8 leads nema 23 stepper motors / uni polar bipolar stepper motors

    8 leads nema 23 stepper motors / uni polar bipolar stepper motors

    • Model No.: 8 leads nema 23 stepper motors / uni polar bipolar stepper motors

    Payment & Shipping Terms: General Introduction: As one of the basic product lines from our products catalogue, 57BYG series of hybrid stepper motors have a long history of more than 30 years. It has become one of our fundamental products, which has won a remarkable reputation throughout both domestic and overseas...

    • Nema 23 stepper motors / 2 phase or 4 phase stepper motor with JST connector

    Nema 23 stepper motors / 2 phase or 4 phase stepper motor with JST connector

    • Model No.: Nema 23 stepper motors / 2 phase or 4 phase stepper motor with JST connector

    Features: Our Hybrid stepper motor rotates at the step angle of 1.8 degrees with a full and high holding torque. The holding torque can reach as much as 25kg.cm with a motor body length flexible from 41mm to 115mm. No contact brushes are installed into our Hybrid stepper motors while NMB namebrand ball bearings will...

    • Hi stack stator laminations hybrid stepper motor NEMA 23/3-phase

    Hi stack stator laminations hybrid stepper motor NEMA 23/3-phase

    • Model No.: Hi stack stator laminations hybrid stepper motor NEMA 23/3-phase

    Payment & Shipping Terms: Features: Being especially designed at 3-phase with a step angle of 1.2 degrees rather than a typical one of 1.8 degrees to offer more choices for the customers in motion control industry. A wide range of rotational speeds can be achieved as the speed is proportional to the frequency of...

    • 60mm heavy duty stepper motor die-cast endbells/2-phase stepper motor

    60mm heavy duty stepper motor die-cast endbells/2-phase stepper motor

    • Model No.: 60mm heavy duty stepper motor die-cast endbells/2-phase stepper motor

    Payment & Shipping Terms: Features: Being named after the outer square length at 60mm, our hybrid stepping motors will also fit some specific applications even though they are not of any NEMA frame sizes. The hybrid stepping motor is having a full step angle of 1.8 degrees by allowing an accuracy of +/-5% per step...

    • 85mm Hybrid Stepper Motor Step Angle of 1.8°for Cutting Machines/ 85BYGH

    85mm Hybrid Stepper Motor Step Angle of 1.8°for Cutting Machines/ 85BYGH

    • Model No.: 85mm Hybrid Stepper Motor Step Angle of 1.8°for Cutting Machines/ 85BYGH

    The product general information: Product commerce clause: Features 1. At a step angle of 1.8°, the 85mm series of hybrid stepper motor delivers a higher holding torque varying from 2.1N.m to 9.3N.m. This wide range of holding torques makes the stepper motors better fit the applications for different industries....

    • 85mm high torque 3-phase hybrid stepper motors anti-rust shaft with 1.2 step angel

    85mm high torque 3-phase hybrid stepper motors anti-rust shaft with 1.2 step angel

    • Model No.: 85mm high torque 3-phase hybrid stepper motors anti-rust shaft with 1.2 step angel

    Payment & Shipping Terms: Features: Well machine-turned front and rear endbells with surface-treatment to well endure the extreme working conditions. The stator lamination stacks are powder-coated in black for anti-rust and anti-moisture performance. Both rotor and stator laminations are formed by high-precision...

    • 85mm enhanced hybrid 2-phase stepper motor copper windings   4 wire stepper motor

    85mm enhanced hybrid 2-phase stepper motor copper windings 4 wire stepper motor

    • Model No.: 85mm enhanced hybrid 2-phase stepper motor copper windings 4 wire stepper motor

    Payment & Shipping Terms: Features: 1. Being at a full step angle of 1.8 degrees, our 85mm hybrid stepper motors are having either 2-phase or 4-phase windings. 2. Bigger motor body size while delivers a wide range of holding torque varying from 2.1N.m to 9.3N.m to better fit applications in different industries....

    • 85HS hybrid stepper motor/ high precision motor with length flexible 68 to 155mm

    85HS hybrid stepper motor/ high precision motor with length flexible 68 to 155mm

    • Model No.: 85HS hybrid stepper motor/ high precision motor with length flexible 68 to 155mm

    The product general information: Product commerce clause: Features 1. This 85mm HS hybrid stepper motor features two endbells at the front and rear end of the motor. Each endbell measures a maximum of 86mm in size, It allows the motor to be easily contacted to the mechanical load. 2. The 85mm HS series of hybrid...

    • 2-phase high precision hybrid stepper motor NEMA 34 flexible motor body length

    2-phase high precision hybrid stepper motor NEMA 34 flexible motor body length

    • Model No.: 2-phase high precision hybrid stepper motor NEMA 34 flexible motor body length

    Payment & Shipping Terms: Feature: Being as one of the most important components in motion control industry, 86mm BYGH series of hybrid stepper motors are of brushless, synchronous electric motors that convert digital pulse into mechanical shaft rotation. Currently, our hybrid stepper motor is having a holding...

    • 86BYGX hybrid stepper motor

    86BYGX hybrid stepper motor

    • Model No.: 86BYGX

    General Description: Step Angle Error………………………………………±5% Peak Temperature Rise…………………………………………80℃Max AmbientTemperatureRange………………………………-20℃~50℃ Insulation Resistance………………………………100MΩMin.500VC DC Dielectric Strength……………………………………500V AC for 1 minute Specifications: * The aboved are just representative products....

    • BYGH 110mm Hybrid Stepper Motor

    BYGH 110mm Hybrid Stepper Motor

    • Model No.: BYGH 110mm Hybrid Stepper Motor

    General Description: Step Angle Error……………………………………………………5% Peak Temperature Rise…………………………………………80℃Max AmbientTemperatureRange……………………………………-20℃~+50℃ Insulation Resistance…………………………………………100MΩMin.500VDC Dielectric Strength…………………………………………500V AC for 1 minute Technical Specifications: * The aboved are just...

    • 110BYGH350 Hybrid Stepper Motor

    110BYGH350 Hybrid Stepper Motor

    • Model No.: 110BYGH350 Hybrid Stepper Motor

    Features: 1. Low heat and high efficiency. When the hybrid stepper motor is working, there is almost no current or no heat. 2. Smooth and accurate. The space vector control of feedback encoder current and vector smoothing filter technology overcome low frequency resonance that affects the traditional stepper motor. 3....

China Hybrid Stepper Motor Suppliers

Here you can find the related products in Hybrid Stepper Motor, we are professional manufacturer of Hybrid Stepper Motor,Stepper Motor,Standard Hybrid Stepping Motor,Linear Hybrid Stepping Motor. We focused on international export product development, production and sales. We have improved quality control processes of Hybrid Stepper Motor to ensure each export qualified product.
If you want to know more about the products in Hybrid Stepper Motor, please click the product details to view parameters, models, pictures, prices and other information about Hybrid Stepper Motor,Stepper Motor,Standard Hybrid Stepping Motor,Linear Hybrid Stepping Motor.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Hybrid Stepper Motor!

Home > Products > Hybrid Stepper Motor

Send Inquiry

Tia Tam

Ms. Tia Tam

Email:

Send Inquiry

Tel:86-519-85161857

Fax:

Mobile Phone:+8615961466444

Email:

Address:Suite 1502 Bldg. 2 Fuchen Center No.177 Tongjiang Blvd. Xinbei District, Changzhou, Jiangsu

Mobile Site

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send